Thanks for visiting our site. Today we're sharing "Falcon Box 1.8" Cracked By Gsm_X_Team Free for all.
Please read description below for more details about this box.
Description: Falcon Box is a Multi-Platform tool for many popular cpu's such as MTK, Qualcomm, SPD etc... Our experience of Falcon Box is that the SPD tab is fake but all other tab's listed are fine. The MTK tab is very crappy but not all MTK CPU you'll get success on. Calculator's algorithm is server side so with no access nor permission to server. You won't be able to calculate any codes on calculator tab. Otherwise it's a good tool for rooting, unlock, frp and many other features... Go download and test all tabs as you wish!
For hard MTK operations that falcon can't handle, you can always download our NCK Dongle Crack 2.5.6.2 on site to complete your mtk operation. Remember NCK & CM2 are the BEST! boxes for MediaTek Phones.
Instructions: Install and run shortcut on desktop. Also always activate before login in otherwise it will not log you into falcon main window! Enjoy!!!
Below is the direct link to download the iTel 1556 Plus
Firmware stock ROM (.Pac File) this Firmware can be use to Flash Unbrick or Upgrade iTel 1556 Plus
iTel 1556 Plus Stock ROM / Firmware
Take a Backup of your personal data before flashing or installing the firmware on your smartphone.
As this helps you to recover the personal data whenever any thing wrong happen
Below is the Firmware Stock ROM [Pac File] for iTel 1556 Plus
Download and Install
Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is
already installed on your computer then SKIP this Step.
Download Stock Rom (Pac) for your Android Device.
Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files:
Now, open UpgradeDownload.exe.
Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Once
your Smartphone is connected successfully to th1ae computer, click on
the Load Packed Button and add the .Pac file (Stock ROM which comes as
.Pac).
Once
you have successfully added the Pac file in Spreadtrum Upgrade Tool,
click on the Start Downloading button to begin the flashing.
During
the flashing process your device will restart automatically. Once
flashing is completed, you will be able to see the Green Passed Message
in Spreadtrum Upgrade Tool.
Now
you have successfully flashed your Android Device using Spreadtrum
Upgrade Tool. Once your Android Device is successfully restarted, Go to
Settings > About Phone > Check firmware.
iTel 1556 Plus Stock ROM
IT1556Plus-C195E-20160815
Below is the direct link to download the Tecno W5 Lte
Firmware stock ROM (flash file) this Firmware can be use to Flash Unbrick or Upgrade Tecno W5 Lte
Take a Backup of your personal data before flashing or installing the firmware on your smartphone.
As this helps you to recover the personal data whenever any thing wrong happen.
SEE TECNO W5 Lite QUICK SPECS BELOW.
Dimension: 153.2 X 76.4 X 7.8 mm.
Android 6.0 Marshmallow.
Mediatek Chipset. MediaTek 6737
RAM: 1GB
Internal Storage Memory: 16GB.
SD card Slot: Yes, support up to 64GB
Rear/Back Camera: 13 MP autofocus camera f/2.0 Up-to (3264 x 2448 pixels)
Front Facing Camera: 5MP
Video Recording: YES
Flash: Yes (LED Flash)
Finger Print,
Battery Capacity- 3000mAh Non-Removable Battery.
Fast Charging Support: Yes
Standby Time: over n/a
HOW TO FLASH Tecno W5 Lte?
The below tutorial only works with the Stock firmware or Custom
Rom which comes with the Scatter file in it (basically Mediatek
devices).
Take a backup of your important data before using the Smart Phone Flash
Tool as because during the flashing process your personal data will be
removed permanently.
Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.
Download and extract the stock firmware on your computer.
After extracting you will find the SP Flash Tool, Driver and instruction manual.
Install the USB Drivers (skip if drivers are already installed).
Open the SP Flash Tool and load the Scatter File from the firmware folder.
Connect your Smartphone to the computer using the USB Driver.
Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Green Ring will appear at the end of successful Flash.
Congratulations, Now your Android Smartphone is successfully running the Stock Rom you have Downloaded.
You Can Also Flash This Device Using SPMultiPortFlashDownloadProject
Turn off the smartphone. Cable is not connected to the computer.
Remove the battery and insert it again
Connect your phone to a computer cable. The operating system detects a new device
Disconnect the cable from the computer.
Run SPMultiPortFlashDownloadProject.exe
Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
Click Scatter File and select the MT6595_Android_scatter.txt file (it's in the folder with the rom).
Click "Start all".
Connect your phone to a computer cable. The program should see and
blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
KISHA SAVE.
Usisahau Kubadilisha Maneno “TANZANIA BLOGGERS HAIRUHUSIWI KOBONYEZA HIVYO” Kuwa unavyotaka wewe.
2. Njia ya Pili ni Kuzuia Ku copy bila kutokea Ujumbe wowote.
Pia njia hii haihitaji uende uka Edit Code za Template katika HTML, Fanya kama hapo juu, Ukisha add hiyo widget Paste Cody Zifuatazo kisha save:-
Thanks for visiting our site.
